If you are a woodworker or have ever tried to cut anything with your table saw, then you know that it can be very difficult to keep the surface clean. The blade leaves behind tiny pieces of metal and slivers of wood which quickly accumulate into an unsightly mess. I’ve found that there are many different methods for cleaning the top of your table saw. In this article, you will find out how to clean the top of your table saw.
How to Clean Table Saw Top
When you’re done cutting wood on the table saw, turn off and unplug the machine before cleaning it. As an extra safety measure, unplugging the machine will ensure that no electric current flows through any part of your table saw while you clean it, which reduces the risk of anyone getting shocked.
Don’t use a wet rag to wipe your table saw top. Wet rags can leave water stains that might cause future rusting on the machine. Instead, use a dry cotton or lint-free soft cloth and wipe down the table saw top to remove dust.
Carefully remove any dust or debris from inside and around your table saw with a cloth, soft brush, or vacuum cleaner attachment. Brush away larger pieces of dust so they don’t scratch or damage the internal surfaces of your machine. Work slowly to avoid mishaps.
Clean your table saw blades with a blade-cleaning brush to remove any dust or debris that might be left after using compressed air. A dry-cutting lubricant can also help keep the blade sharp and prevent future rusting if you plan on storing your table saw for more than one day.
Try dry sanding when you have heavy rust buildup on your table saw top. Use very fine sandpaper (no coarser than 220 grit) folded in half over itself to prevent tearing it up when applying pressure. Rub back-and-forth across the surface about 45 degrees then turn it over and rub across it 45 degrees in the other direction. If you notice rust appearing underneath the sandpaper (which will look like little red spots), stop working for fear of scratching through your work surface.
To smooth the surface of the table saw, use a long strip of sandpaper. I find it easier to hold by folding the strip in half and only holding the folded section. Keep doing this until you get down to the surface so that you don’t scratch your workbench with the metal edge of the paper. This glides over the working surface very quickly, leaving even smoothing behind it.
Make sure you’re using a sawdust collection system or that it’s working properly. It will keep the tabletop clean and is essential to good health. If you don’t have a sawdust collection system, roll up a sheet of paper and then push it across the table with a stick to remove all that stuff that can go into your lungs. You would be wise if you did this often enough.
Why Should You Clean Table Saw Top?
Let’s see what can happen if you don’t.
It is a fact that the table saw top must be cleaned regularly to keep it in proper working order. It should not come as a surprise though – the consequences could be dire if you continue to ignore this rule.
If you want to use the machine with the most precision, safety, and ease of use – keep up with regular cleaning of your table saw top. By doing so you will avoid potential slipping accidents and blade breakage as well as not over-exhausting your machinery.
A clean surface also ensures that you have a perfectly smooth base to guide a circular saw on a piece of wood or other material. The more carefully you prepare the surface on which you are going to work, the better end result you will achieve.
Cleaning your table saw the top on a regular basis is very important. Cleaning will help eliminate any problems that might occur with rust or carbon buildup. Table saw tops, just like any other machine, can get quite dirty and dusty. It is important to clean them regularly so as not to cause damage and/or serious injury to yourself and others around you.
Regularly cleaning your table saw top also provides for increased accuracy in cuts made from the machine. When cutting certain materials such as plywood, it’s possible for small changes in elevation between cuts to cause huge irregularities in the final product which may make it unusable for its intended purpose. In most cases, you can prevent this by making sure the area surrounding your saw is free of any debris, taking care to make your first cut correctly, and cleaning the top regularly.
You should not have to worry about your table saw top being clean. I’ve given you a few helpful tips on how to maintain the surface, as well as what products will help provide that fresh and shiny look. With these strategies in mind, go forth and make those cuts with confidence.